Maytag Appliance Repair in Newton, MA
Your Home Deserves the Best—Our Certified Technicians Provide, Reliable Service And We Deliver Fast, Affordable, and Long-Lasting Repairs In Newton, Newtonville, West Newton, Newton Center, Newton Highlands, Waban, Newton Lower Falls, Newton Upper Falls, Massachusetts and Nearby Areas
Maytag Appliance Repair in Newton, Massachusetts | Appliance Repair Pros
Homeowners in Newton, from the classic family homes in Newton Centre to the bustling streets of Newtonville, have long trusted the “Maytag Man” promise of dependability. Maytag appliances are built to be tough workhorses, often featuring commercial-grade technology in residential machines. Appliance Repair Pros provides focused repair services for this rugged American brand. We work directly with residents throughout the Garden City, including Waban, West Newton, and Auburndale, to diagnose and resolve issues with Maytag washers, dryers, refrigerators, dishwashers, ovens, and cooktops.
We understand that while Maytag appliances are designed for durability, they still rely on precision components like the shift actuators in Bravos washers or the specialized control boards in their kitchen suites. Our team is familiar with the unique needs of Newton’s housing stock, from the basement laundry setups in older Victorians to the galley kitchens in Nonantum. We approach every service call with a commitment to accurate diagnostics, clean work habits, and clear communication about the condition of your machine. Contact us today for assistance with your Maytag appliance.
Maytag Appliances We Service in Newton
Maytag is famous for its laundry equipment, but their kitchen appliances are equally common in Newton homes. We provide comprehensive repair services that cover the heavy-duty motors, electronic controls, and commercial-grade components of these machines. We aim to identify the specific failure point to ensure your appliance runs efficiently for years to come.
Common Maytag appliances we repair:
- Bravos XL and top-load washers
- Maxima front-load washers
- Pet Pro washers and dryers
- Commercial-grade residential dryers
- French door and side-by-side refrigerators
- Bottom freezer units with “Strongbox” door bins
- Stainless steel tub dishwashers
- Gas and electric ranges with Power Preheat
What makes Maytag repairs different:
- MCT (Maytag Commercial Technology) components in consumer units
- Unique “splutch” cam systems in top-load washers
- Direct Drive motors in front-load units
- Dual Power Filtration systems in dishwashers
- Fingerprint resistant stainless steel finishes
- Specific diagnostic modes for “Commercial Technology” lines
Why Homeowners Choose Appliance Repair Pros for Maytag Repairs
Brand-Specific Diagnostics
Maytag appliances use robust internal diagnostic software. We know the specific button sequences to access these modes, allowing us to test individual components like the lid lock solenoid or the wash motor without taking the machine apart first. This methodical approach ensures we identify the root cause—whether it is a mechanical jam or a software glitch—saving you time and guesswork.
Experience Across Maytag Sub-Lines
A Maytag Bravos top-loader works very differently from a Maxima front-loader. We are experienced with the full evolution of the brand, from the older “Dependable Care” models found in long-standing Newton homes to the modern smart-capable units. We understand the specific wear points of the commercial-grade parts used in these machines.
Respect for Your Home
Inviting a technician into your home requires trust. We treat your property with care. We use protective mats for our tools and wear shoe covers to protect your floors. Whether we are working in a tight laundry closet in Newton Upper Falls or a spacious kitchen in Newton Highlands, we clean up our work area after the repair is complete.
Dependable Scheduling
We know your time is valuable. We strive to offer appointment slots that work for your schedule and we communicate clearly about our arrival. We do not leave you waiting all day without updates. When you book a service with us, we commit to being there and getting the job done efficiently.
Service Area Focus in Newton
We are a local business dedicated to serving the Newton community. We know the local traffic patterns on Route 9 and Walnut Street, which helps us arrive within our scheduled windows. Our proximity allows us to offer more consistent coverage and faster follow-up visits if parts need to be ordered.
Common Problems We Fix in Maytag Appliances
Maytag Bravos Washer Not Spinning or Agitating
This is the most common issue with the Bravos line. The washer fills and drains but makes a clicking sound and won’t spin.
Likely causes:
- Failed shift actuator
- Worn “splutch” cam kit
- Broken drive belt
- Lid lock failure
How we diagnose it
We check the error codes for a shifter fault. We inspect the plastic cam gear under the unit; if the teeth are worn, the machine cannot engage the spin gear. We also test the optical sensor on the actuator.
What you can do right now
Try unplugging the machine for one minute to reset the board. If the clicking continues, stop the cycle to prevent burning out the motor.
Maytag Refrigerator Not Cooling
If the fridge is warm but the freezer has frost on the back wall, it indicates a defrost system failure. This is common in models sharing the “Jazz” control board platform.
Likely causes:
- Main control board failure
- Defrost heater burnout
- Bi-metal thermostat open
- Condenser fan failure
How we diagnose it
We force the unit into a defrost cycle using the control panel. If the heater turns on, the board is likely the issue. If it stays cold, we test the heater element for continuity.
What you can do right now
Clean the condenser coils underneath or behind the fridge. If the freezer is packed with ice, you can manually defrost it (unplug with doors open) to buy a few days of cooling while waiting for service.
Maytag Dryer Squeaking or Thumping
Maytag dryers are heavy-duty, but the rollers eventually wear out. A rhythmic thump or high-pitched squeal is a sign of mechanical wear.
Likely causes:
- Worn drum support rollers
- Idler pulley seized
- Worn drum glides
- Blower wheel obstruction
How we diagnose it
We listen to the frequency of the sound. A thump usually means a roller has a flat spot. A squeal often points to the idler pulley tensioner. Maytag dryers often use more rollers than other brands, so we check them all.
What you can do right now
Stop using the dryer if the noise is loud. Continuing to run it can cause the drum to rub against the metal cabinet, ruining the clothes and the machine.
Maytag Dishwasher Not Cleaning (Food Grit Leftover)
Maytag dishwashers use a built-in hard food disposer (chopper). If this fails, food recirculates onto the clean dishes.
Likely causes:
- Broken chopper blade assembly
- Clogged filter screen
- Wash motor capacitor failure
- Low water level
How we diagnose it
We inspect the chopper area in the sump. If the blade is broken, the screen clogs quickly. We also verify the wash motor is spinning at full speed to generate proper pressure.
What you can do right now
Remove the bottom rack and check for debris in the sump area. Run the hot water at the sink before starting the dishwasher to ensure a hot fill.
Maytag Oven Not Heating
On gas ranges, a burner that clicks but won’t light or an oven that takes 30 minutes to preheat is a sign of ignition trouble.
Likely causes:
- Weak oven igniter (glow bar)
- Spark module failure
- Failed bake element (electric)
- Control board relay
How we diagnose it
We measure the amperage draw of the igniter. If it is too weak, the gas safety valve will not open. On electric units, we test the hidden bake element for breaks.
What you can do right now
If the surface burners are clicking but not lighting, check if the caps are wet from cleaning. Dry them thoroughly and try again.
Maytag Washer “OL” or “Lo FL” Error
These errors stand for “Over Load” or “Low Flow.” They are common on high-efficiency top loaders.
Likely causes:
- Mechanical friction (something stuck between tubs)
- Inlet valve screens clogged
- Bearing failure causing drag
How we diagnose it
We spin the tub by hand to check for drag. If it is stiff, there may be clothing stuck between the tubs or a bad bearing. For flow errors, we check water pressure and valve operation.
What you can do right now
Remove some items if the washer is stuffed full. Check the fill hoses for kinks or clogged screens.
Our Maytag Repair Services by Appliance Type
Maytag Refrigerator and Freezer Repair
Maytag fridges are built for durability, often featuring stainless steel handles and heavy-duty hinges. We specialize in fixing cooling failures, ice maker jams, and “jazz board” electrical issues. We also address the common “water on the floor” issue caused by clogged defrost drains.
Symptoms we commonly fix:
- Fridge section freezing food
- Ice maker motor humming but not turning
- Door seal tearing
- Compressor clicking on and off
- Light bulb socket failure
How we approach the repair
We check the thermistors (sensors) to ensure the fridge isn’t running too cold due to bad data. We clear and modify drain tubes to prevent future clogs.
Maytag Washing Machine Repair
Whether you have a Bravos top-loader or a Maxima front-loader, we keep them spinning. We are experts at diagnosing the “lid lock” errors that prevent the machine from starting and the loud roaring noise that indicates a tub bearing failure.
Symptoms we commonly fix:
- Washer senses load but won’t fill
- Loud banging during spin (suspension rods)
- Clothes soaking wet after cycle
- Oil leaking underneath (gearcase issue)
How we approach the repair
We replace suspension rods in sets of four to ensure the machine balances correctly. We test the actuator motor to ensure it is shifting gears properly.
Maytag Dryer Repair
Maytag dryers are some of the most reliable on the market, but even they need maintenance. We fix heating elements, replace squeaky rollers, and clean out lint buildup inside the cabinet that can pose a fire risk.
Symptoms we commonly fix:
- Timer knob turns but dryer won’t start
- No heat
- Clothes take multiple cycles to dry
- Door latch broken
How we approach the repair
We test the cycling thermostat and high-limit thermostat. If the thermal fuse is blown, we always check the home’s venting system, as that is the primary cause of the failure.
Maytag Dishwasher Repair
We service Maytag dishwashers with the Dual Power Filtration system. We fix drainage issues, control panel failures (buttons not responding), and soap dispenser latches.
Symptoms we commonly fix:
- Clean light flashing (heating error)
- Grinding noise (chopper blade)
- Leaking from the front door
- Unit fills and drains immediately
How we approach the repair
We reset the control board after heating errors. We inspect the chopper blade for damage from hard objects like olive pits or glass.
Maytag Oven Range and Cooktop Repair
We handle ignition issues on Maytag gas ranges and element burnouts on Gemini double ovens. We prioritize temperature accuracy so your baking results are consistent.
Symptoms we commonly fix:
- Oven takes too long to preheat
- Control panel beeping with F-codes
- Broil works but bake does not
- Self-clean latches stuck
How we approach the repair
We test the resistance of the sensor probe. On double ovens, we verify that the cooling fan is operating to protect the electronics between the two cavities.
Maytag Microwave Repair
We repair over-the-range Maytag microwaves. Common issues involve the unit running but not heating (magnetron) or the handle breaking off due to heat stress.
Symptoms we commonly fix:
- No heat
- Turntable not spinning
- Display flickering
- Fan stuck on
How we approach the repair
We test the high-voltage diode and capacitor. We also check the door switches, which are a critical safety interlock.
Brand Notes for Maytag Sub-Lines
Maytag Bravos Service and Repair
The Bravos line is Maytag’s high-efficiency top-load series. These units use very little water and rely on the “impeller” plate to move clothes. We commonly see “UL” (unbalanced load) errors caused by worn suspension rods. Diagnosing this correctly prevents the customer from buying a new control board when they really need new springs.
Maytag Maxima Service and Repair
Maxima was Maytag’s premium front-load line. These machines are built well but can suffer from mold in the door boot if not ventilated. We also see pump filter clogs and main board communication errors (F01/E01) which we can diagnose and repair.
Maytag Commercial Technology (MCT)
Many residential units now bear the “MCT” badge. This indicates upgraded drive components (like belts and motors). While tougher, they still have electronic controls that can fail due to power surges. We are familiar with the specific parts catalog for these MCT units.
Understanding Common Maytag Error Codes and Warnings
Maytag appliances speak in codes. Here are the ones we see most often in Newton.
- F1E1 (Washer): Main Control Fault. The computer is having internal memory errors.
- F7E1 (Washer): Shift Actuator Fault. The washer can’t shift from agitate to spin.
- F51 (Washer): Rotor Position Sensor. The motor sensor is failing or the tub is obstructed.
- OL (Washer): Overload. The machine is struggling to turn the drum.
- Sd (Washer): Suds Lock. Too much detergent is creating drag on the basket.
- F1-1 (Oven): Runaway Temp. The oven is getting too hot dangerously fast.
- F2-1 (Oven): Keypad stuck. A button is shorted out.
- Clean Light Flashing (Dishwasher): Heater Fault. The water didn’t reach the target temperature.
Maintenance Tips for Maytag Owners in Newton
Routine care keeps the “Maytag Man” away.
- Clean the Condenser: Vacuum the coils under your Maytag fridge annually to keep the compressor running cool.
- Affresh Cycles: Use an Affresh tablet in your Bravos washer monthly to prevent mold and soap scum buildup.
- Check Hoses: Replace rubber fill hoses every 5 years to prevent flooding.
- Clean the Chopper: If your dishwasher has a removable filter, clean it weekly. If it has a hard food disposer, listen for grinding noises which indicate a jam.
- Use HE Detergent: Maytag HE washers need very little soap. Excess suds cause “Sd” errors and damage the pump.
- Vent Maintenance: Clean your dryer vent ducting yearly. Maytag dryers have thermal fuses that blow instantly if airflow is blocked.
- Avoid Foil: Do not line the bottom of your oven with foil. It reflects heat onto the hidden element and can burn it out.
Serving Newton, Massachusetts and Nearby Areas
We are proud to serve the entire Newton community. From the busy commercial areas of Newtonville to the quiet residential streets of Waban, we are your local Maytag experts. We cover all the villages and zip codes in the area.
- Newton Centre
- Newton Highlands
- Newton Lower Falls
- Newton Upper Falls
- Newtonville
- Waban
- West Newton
- Auburndale
- Chestnut Hill
- Nonantum
- Needham (Nearby)
- Waltham (Nearby)
Zip codes we serve: 02458, 02459, 02460, 02461, 02462, 02464, 02465, 02466, 02467, 02468
Frequently Asked Questions About Maytag Appliance Repair
Is Maytag really better than other brands?
Maytag is owned by Whirlpool, but their “MCT” units often feature upgraded drive systems and sturdier suspension components than standard models. They are generally very repairable and parts are widely available, making them a good long-term investment.
Why is my Maytag washer making a loud clicking noise?
If it clicks during the transition between wash and spin, it is likely the shift actuator trying to engage the gears. If the plastic arm on the actuator breaks, it clicks repeatedly. We can replace this part easily.
Can you replace the lid glass on my Maytag washer?
Yes, if the glass shattered, we can replace the entire lid assembly. However, be careful to check if the lid lock mechanism was damaged by the impact, as that often needs replacement too.
My Maytag dishwasher has a blinking light and won’t start. Why?
A blinking light (often the “Clean” light) indicates a heater failure or a door latch issue. It is a safety lockout. We can test the heating element and reset the control board to get it working again.
Why does my Maytag dryer take two cycles to dry?
This is almost always a venting issue. The dryer is heating, but the moist air is trapped. Check your home’s vent duct. It could also be the moisture sensor bars inside the drum are coated with fabric softener wax.
Do you service Maytag Gemini double ovens?
Yes, the Gemini range (with two ovens in the space of one) is a specialty of ours. We often fix issues with the control board or the bake elements in the smaller upper oven.
How long does a repair take?
Most repairs are completed in 45 to 90 minutes. We carry common Maytag parts like actuators, lid locks, and igniters to finish the job in one trip whenever possible.
Is it worth repairing a 15-year-old Maytag dryer?
Yes. Older Maytag dryers are incredibly simple and durable. Replacing a belt, roller, or heating element is very cost-effective and can give the machine another 5-10 years of life.
Why is my Maytag fridge leaking water inside?
This is usually a frozen defrost drain. The water from the defrost cycle has nowhere to go but onto the shelves or crisper drawers. We steam the drain and can install a heat probe to prevent it from freezing again.
Is there a Maytag appliance repair service near me in Newton?
Yes, Appliance Repair Pros is locally based and serves all of Newton and the surrounding villages. We prioritize Maytag service calls because we have the specific experience needed for them.
Conclusion
Maytag appliances are built to last, but they still need professional care when things go wrong. Appliance Repair Pros offers reliable and skilled Maytag appliance repair in Newton, Massachusetts. Whether you are dealing with a Bravos washer that won’t spin, a warm fridge, or a dishwasher that won’t clean, our technicians have the tools and experience to fix it right. We serve homeowners across Newton Centre, Waban, and the surrounding villages with respect and professionalism. Contact us today.
